Regular stock trailer maintenance keeps cattle safe, prevents roadside breakdowns, and protects one of the most important tools on your operation. Livestock trailers take a beating from manure, urine, mud, road salt, and animals pushing on gates. This stock trailer maintenance plan covers 12 essential tasks for floors, gates, bearings, brakes, tires, and wiring, organized so you know what to do before each trip, monthly, and once a year.
Keep a simple log of stock trailer maintenance with dates and notes. It helps you stay on schedule and supports resale value.

Why Stock Trailer Maintenance Matters
A trailer failure with cattle on board can injure animals, damage equipment, and endanger other drivers. Most failures, such as blown tires, seized bearings, broken gate latches, or rotted floors, give warning signs first. Consistent stock trailer maintenance catches those signs early and costs far less than emergency repairs.
Before Every Trip
1. Tires and Lug Nuts
Check tire pressure when cold, including the spare. Look for cuts, bulges, cracks, and uneven wear. Confirm all lug nuts are present and tight. NHTSA’s tire safety guidance explains inflation and aging.
2. Lights and Wiring
Plug in and test running lights, brake lights, turn signals, and clearance lights. Check the plug for corrosion.
3. Brakes and Breakaway
Test the electric brakes at low speed with your brake controller. Confirm the breakaway battery is charged and the cable is attached to the truck.
4. Hitch and Safety Chains
Verify the coupler or gooseneck latch is locked, safety chains are attached and crossed for bumper pulls, and the jack is fully raised.
5. Gates and Latches
Open and close every gate. Make sure latches engage fully and cannot pop open when cattle push against them.
Monthly or Every Few Hauls
6. Clean Out Manure and Wash the Trailer
Manure and urine are corrosive to both steel and aluminum. Scrape out bedding and manure after hauls, rinse the floor and walls, and let the trailer dry. In winter, rinse off road salt. Cleaning is the foundation of good stock trailer maintenance and also supports biosecurity.
7. Inspect the Floor
Lift mats and inspect the floor for rot, soft spots, corrosion, and cracked welds. Check the underside and crossmembers. Replace damaged boards or repair corroded areas promptly.
8. Lubricate Hinges and Moving Parts
Lubricate gate hinges, latches, slider tracks, the jack, and any spring-loaded parts. Well-lubricated gates are safer and easier to operate.
9. Check Slats, Sides, and Roof
Look for bent or broken slats, sharp edges, loose panels, and roof leaks. Repair anything that could injure animals.
Annually or by Mileage
10. Service Wheel Bearings
Inspect and repack or service wheel bearings according to the axle manufacturer’s recommendations. Many producers service bearings once a year. Failed bearings can lock a wheel or cause fires.
11. Inspect and Adjust Brakes
Have brake shoes, magnets, drums, and wiring inspected and adjusted. Replace worn parts before they fail under a heavy load.
12. Inspect Frame, Suspension, and Welds
Inspect the frame, crossmembers, gooseneck or tongue, springs, shackles, and torsion axles. Look for cracks, rust, and loose hardware, especially at high-stress points.
Stock Trailer Maintenance Schedule
| Frequency | Tasks |
|---|---|
| Every trip | Tires and lug nuts, lights, brakes and breakaway, hitch, gates and latches |
| Monthly | Clean and wash, floor inspection, lubrication, slats and roof |
| Annually | Bearings, brakes, frame and suspension, tire age |
Rust and Corrosion Prevention
For steel trailers, touch up chipped paint, treat surface rust early, and consider protective coatings in high-wear areas. For aluminum trailers, keep floors clean and dry, and check areas where aluminum meets steel. Store the trailer on a well-drained surface, ideally under cover. Good stock trailer maintenance habits can add years to a trailer’s life.
Winter and Summer Considerations
In winter, wash off road salt often, check that latches are not frozen, and use slat covers if you haul in severe cold. In summer, check tire pressure more often because heat raises temperatures, and keep ventilation clear. Seasonal checks are a key part of stock trailer maintenance in variable climates.
DIY or Professional?
Most owners can handle cleaning, lubrication, tire checks, and light tests. Bearing service, brake work, and structural welding are often best handled by a trailer shop unless you have the tools and experience. NDSU Extension also recommends that producers inspect stock trailers before transporting cattle.
Stock Trailer Maintenance FAQs
How often should I service my stock trailer?
Do quick checks before every trip, deeper inspections monthly, and full service at least annually.
How do I keep manure from damaging the floor?
Clean out manure and wet bedding promptly, rinse, and let the floor dry before storing the trailer.
Should I replace tires by age?
Yes. Trailer tires can age out before tread wears out. Follow the tire manufacturer’s guidance and replace cracked tires.
Keep Your Trailer Working
A consistent stock trailer maintenance routine keeps cattle safe and your trailer on the road. Use these 12 essential tasks, keep good records, and address problems early.
Ready for an upgrade? Browse our livestock and pen trailers, read our used stock trailers guide, or contact us. Call or text (406) 208-3277, Monday through Friday, 9am to 5pm.
